Este infórme contiene informacion muy importante sobre
la calidad de su agua beber. Tradúscalo o hable con alguien que lo entienda
bien.
Is my water
safe?
We are pleased to present this year's Annual Water
Quality Report (Consumer Confidence Report) as required by the Safe Drinking
Water Act (SDWA). This report is designed to provide details about where
your water comes from, what it contains, and how it compares to standards
set by regulatory agencies. This report is a snapshot of last year's water
quality. We are committed to providing you with information because informed
customers are our best allies.
Do
I need to take special precautions?
Some people may be more vulnerable to contaminants in
drinking water than the general population. Immuno-compromised persons such
as persons with cancer undergoing chemotherapy, persons who have undergone
organ transplants, people with HIV/AIDS or other immune system disorders,
some elderly, and infants can be particularly at risk from infections.
These people should seek advice about drinking water
from their health care providers. EPA/Centers for Disease Control (CDC)
guidelines on appropriate means to lessen the risk of infection by
Cryptosporidium and other microbial contaminants are available from the Safe
Water Drinking Hotline (800-426-4791).
Where
does my water come from?
The Cuatro Villas MDWCA purchases water from: City of
Espanola NM-3501921, who purchases water from Agua Sana MDWCA NM-3502421.
Source
water assessment and its availability.
To review a copy of the source water assessment please
contact the Drinking Water Bureau at 505-476-8620 or toll free
1-877-654-8720.
Why
are there contaminants in my drinking water?
Drinking water, including bottled water, may reasonably
be expected to contain at least small amounts of some contaminants. The
presence of contaminants does not necessarily indicate that water poses a
health risk. More information about contaminants and potential health
effects can be obtained by calling the Environmental Protection Agency's
(EPA) Safe Drinking Water Hotline (800-426-4791). The sources of drinking
water (both tap water and bottled water) include rivers, lakes, streams,
ponds, reservoirs, springs, and wells. As water travels over the surface of
the land or through the ground, it dissolves naturally occurring minerals
and, in some cases, radioactive material, and can pick up substances
resulting from the presence of animals or from human activity: microbial
contaminants, such as viruses and bacteria, that may come from sewage
treatment plants, septic systems, agricultural livestock operations, and
wildlife; inorganic contaminants, such as salts and metals, which can be
naturally occurring or result from urban stormwater runoff, industrial, or
domestic wastewater discharges, oil and gas production, mining, or farming;
pesticides and herbicides, which may come from a variety of sources such as
agriculture, urban stormwater runoff, and residential uses; organic Chemical
Contaminants, including synthetic and volatile organic chemicals, which are
by-products of industrial processes and petroleum production, and can also
come from gas stations, urban stormwater runoff, and septic systems; and
radioactive contaminants, which can be naturally occurring or be the result
of oil and gas production and mining activities. In order to ensure that tap
water is safe to drink, EPA prescribes regulations that limit the amount of
certain contaminants in water provided by public water systems. Food and
Drug Administration (FDA) regulations establish limits for contaminants in
bottled water which must provide the same protection for public health.
How
can I get involved?
Please Contact Sam Rodar at 505-670-0257 for more
information.
Description of Water Treatment Process
Your water is treated by disinfection. Disinfection
involves the addition of chlorine or other disinfectant to kill dangerous
bacteria and microorganisms that may be in the water. Disinfection is
considered to be one of the major public health advances of the 20th
century.
Did you know that the average U.S. household uses
approximately 400 gallons of water per day or 100 gallons per person per
day? Luckily, there are many low-cost and no-cost ways to conserve water.
Small changes can make a big difference - try one today and soon it will
become second nature.
•
Take short showers - a 5-minute shower uses 4
to 5 gallons of water compared to up to 50 gallons for a bath.
•
Shut off water while brushing your teeth,
washing your hair and shaving and save up to 500 gallons a month.
•
Use a water-efficient showerhead. They're
inexpensive, easy to install, and can save you up to 750 gallons a month.
•
Run your clothes washer and dishwasher only
when they are full. You can save up to 1,000 gallons a month.
•
Water plants only when necessary.
•
Fix leaky toilets and faucets. Faucet washers
are inexpensive and take only a few minutes to replace. To check your toilet
for a leak, place a few drops of food coloring in the tank and wait. If it
seeps into the toilet bowl without flushing, you have a leak. Fixing it or
replacing it with a new, more efficient model can save up to 1,000 gallons a
month.
•
Adjust sprinklers so only your lawn is
watered. Apply water only as fast as the soil can absorb it and during the
cooler parts of the day to reduce evaporation.
•
Teach your kids about water conservation to
ensure a future generation that uses water wisely. Make it a family effort
to reduce next month's water bill!
•
Visit
www.epa.gov/watersense
for more information.
The purpose of this survey is to determine whether a
cross-connection may exist at your home or business. A cross connection is
an unprotected or improper connection to a public water distribution system
that may cause contamination or pollution to enter the system. We are
responsible for enforcing cross-connection control regulations and insuring
that no contaminants can, under any flow conditions, enter the distribution
system. If you have any of the devices listed below please contact us so
that we can discuss the issue, and if needed, survey your connection and
assist you in isolating it if that is necessary.
•
Boiler/ Radiant heater (water heaters not
included)
•
Underground lawn sprinkler system
•
Pool or hot tub (whirlpool tubs not included)
•
Additional source(s) of water on the property
•
Decorative pond
•
Watering trough
Protection of drinking water is everyone's
responsibility. You can help protect your community's drinking water source
in several ways:
•
Eliminate excess use of lawn and garden
fertilizers and pesticides - they contain hazardous chemicals that can reach
your drinking water source.
•
Pick up after your pets.
•
If you have your own septic system, properly
maintain your system to reduce leaching to water sources or consider
connecting to a public water system.
•
Dispose of chemicals properly; take used
motor oil to a recycling center.
•
Volunteer in your community. Find a watershed
or wellhead protection organization in your community and volunteer to help.
If there are no active groups, consider starting one. Use EPA's Adopt Your
Watershed to locate groups in your community, or visit the Watershed
Information Network's How to Start a Watershed Team.
•
Organize a storm drain stenciling project
with your local government or water supplier. Stencil a message next to the
street drain reminding people "Dump No Waste - Drains to River" or "Protect
Your Water." Produce and distribute a flyer for households to remind
residents that storm drains dump directly into your local water body.
1)
Consumer Confidence Reporting- The Cuatro Villas
MDWCA has received a violation for failing to return certification to NMED
for the 2022, 2023 and 2024 Consumer Confidence Report and remains out of
compliance with this requirement.
2)
Consumer Confidence Reporting- The Cuatro Villas
MDWCA has received a violation for failing to complete, submit,
post/distribute and certify the 2024 Consumer Confidence Report to its
consumers/water users and remains out of compliance with this requirement
until the 2024 Consumer Confidence Report is completed, submitted and
certified that it distributed/ posted to its consumers.
On March 4, 2024, the New Mexico Environment Department
Drinking Water Bureau (DWB) conducted a sanitary survey site visit at the
Cuatro Villas MDWCA water system. During the survey, seven (7) significant
deficiencies were issued. We
have not corrected any of the deficiencies and we received a violation in
March of 2026.
1)
Code 001T
- No or inadequate system maps.
Status: This deficiency remains uncorrected as of May
2026, Cuatro Villas MDWCA proposes to work on this deficiency and make
corrections before the end of 2026.
2)
Code 003F
- No or inadequate Distribution System Sampling Plan. Failure to follow
sampling plan.
Status: This deficiency remains uncorrected as of May
2026, Cuatro Villas MDWCA proposes to work on this deficiency and make
corrections before the end of 2026.
3)
Code 003Q
- Required records not kept on site.
Status: This deficiency remains uncorrected as of May
2026, Cuatro Villas MDWCA proposes to work on this deficiency and make
corrections before the end of 2026.
4)
Code 004B
- Inadequate or lack of an emergency response plan.
Status: This deficiency remains uncorrected as of May
2026, Cuatro Villas MDWCA proposes to work on this deficiency and make
corrections before the end of 2026.
5)
Code 004C
- Inadequate or lack of an operations and maintenance plan or necessary
operational policies.
Status: This deficiency remains uncorrected as of May
2026, Cuatro Villas MDWCA proposes to work on this deficiency and make
corrections before the end of 2026.
6)
Code 006M
- No inspection of storage tank #2 (recommended every 3 years).
Status: This deficiency remains uncorrected as of May
2026, Cuatro Villas MDWCA proposes to work on this deficiency and make
corrections before the end of 2026.
7)
Code 006M
- No inspection of storage tank #3 (recommended every 3 years).
Status: This deficiency remains uncorrected as of May
2026, Cuatro Villas MDWCA proposes to work on this deficiency and make
corrections before the end of 2026.
Cuatro Villas MDWCA was required by the EPA to submit a
Lead Service Line Inventory (LSLI) by October 2024. We have not completed
the LSLI and remain out of compliance. We received a violation in February
2026. For more information about the inventory, contact Cuatro Villas MDWCA
at 505-670-0257 or emailing
srodar@cybermesa.com
Lead can cause serious health problems, especially for
pregnant women and young children. Lead in drinking water is primarily from
materials and components associated with service lines and home plumbing.
CUATRO VILLAS MDWCA is responsible for providing high quality drinking water
and removing lead pipes, but cannot control the variety of materials used in
plumbing components in your home. You share the responsibility for
protecting yourself and your family from the lead in your home plumbing. You
can take responsibility by identifying and removing lead materials within
your home plumbing and taking steps to reduce your family’s risk. Before
drinking tap water, flush your pipes for several minutes by running your
tap, taking a shower, doing laundry or a load of dishes. You can also use a
filter certified by an American National Standards Institute accredited
certifier to reduce lead in drinking water. If you are concerned about lead
in your water and wish to have your water tested, contact CUATRO VILLAS
MDWCA (Public Water System Id: NM3533526) by calling 505-670-0257 or
emailing
srodar@cybermesa.com . Information on lead in drinking water,
testing methods, and steps you can take to minimize exposure is available at
http://www.epa.gov/safewater/lead
.
While your drinking water meets EPA's standard for
arsenic, it does contain low levels of arsenic. EPA's standard balances the
current understanding of arsenic's possible health effects against the costs
of removing arsenic from drinking water. EPA continues to research the
health effects of low levels of arsenic which is a mineral known to cause
cancer in humans at high concentrations and is linked to other health
effects such as skin damage and circulatory problems.
Nitrate in drinking water at levels above 10 ppm is a
health risk for infants of less than six months of age. High nitrate levels
in drinking water can cause blue baby syndrome. Nitrate levels may rise
quickly for short periods of time because of rainfall or agricultural
activity. If you are caring for an infant, you should ask for advice from
your health care provider.
In order to ensure that tap water is safe to drink, EPA
prescribes regulations which limit the amount of contaminants in water
provided by public water systems. The table below lists all of the drinking
water contaminants that we detected during the calendar year of this report.
Although many more contaminants were tested, only those substances listed
below were found in your water. All sources of drinking water contain some
naturally occurring contaminants. At low levels, these substances are
generally not harmful in our drinking water. Removing all contaminants would
be extremely expensive, and in most cases, would not provide increased
protection of public health. A few naturally occurring minerals may actually
improve the taste of drinking water and have nutritional value at low
levels. Unless otherwise noted, the data presented in this table is from
testing done in the calendar year of the report. The EPA or the State
requires us to monitor for certain contaminants less than once per year
because the concentrations of these contaminants do not vary significantly
from year to year, or the system is not considered vulnerable to this type
of contamination. As such, some of our data, though representative, may be
more than one year old. In this table you will find terms and abbreviations
that might not be familiar to you. To help you better understand these
terms, we have provided the definitions below the table.
|
Contaminants |
MCLG or
MRDLG |
MCL, TT,
or
MRDL |
Detect
In
Your
Water |
Range |
Sample Date |
Violation |
Typical Source |
||||||||
|
Low |
High |
||||||||||||||
|
Disinfectants & Disinfection By-Products |
|||||||||||||||
|
(There is convincing evidence that addition of a disinfectant is
necessary for control of microbial contaminants) |
|||||||||||||||
|
Chlorine (as Cl2)
(ppm) |
4 |
4 |
1 |
NA |
NA |
2025 |
No |
Water additive used to control microbes |
|||||||
|
Haloacetic Acids
(HAA5) (ppb) |
NA |
60 |
2.89 |
NA |
NA |
2025 |
No |
By-product of drinking water chlorination |
|||||||
|
TTHMs [Total
Trihalomethanes]
(ppb) |
NA |
80 |
23 |
NA |
NA |
2025 |
No |
By-product of drinking water disinfection |
|||||||
|
Inorganic Contaminants |
|||||||||||||||
|
Arsenic (ppb) |
00 |
10 |
8 |
7 |
8 |
2025 |
No |
Erosion of natural deposits; Runoff from orchards; Runoff from glass
and electronics production wastes |
|||||||
|
Barium (ppm) |
2 |
2 |
0.019 |
NA |
NA |
2023 |
No |
Discharge of drilling wastes; Discharge from metal refineries;
Erosion of natural deposits |
|||||||
|
Contaminants |
MCLG or
MRDLG |
MCL,
TT, or
MRDL |
Detect
In
Your
Water |
Range |
Sample Date |
Violation |
Typical Source |
||||||||
|
Low |
High |
||||||||||||||
|
Chromium (ppb) |
100 |
100 |
13 |
0 |
13 |
2023 |
No |
Discharge from steel and pulp mills; Erosion of natural deposits
|
|||||||
|
Fluoride (ppm) |
4 |
4 |
3.7 |
2.3 |
3.7 |
2023 |
No |
Erosion of natural deposits; Water additive which promotes strong
teeth; Discharge from fertilizer and aluminum factories |
|||||||
|
Nitrate [measured as
Nitrogen] (ppm) |
10 |
10 |
9.12 |
0.33 |
9.12 |
2025 |
No |
Runoff from fertilizer use; Leaching from septic tanks, sewage;
Erosion of natural deposits |
|||||||
|
Selenium (ppb) |
50 |
50 |
2.6 |
NA |
NA |
2023 |
No |
Discharge from petroleum and metal refineries; Erosion of natural
deposits; Discharge from mines |
|||||||
|
Radioactive Contaminants |
|||||||||||||||
|
Alpha emitters (pCi/L) |
00 |
15 |
1.7 |
00 |
1.7 |
2024 |
No |
Erosion of natural deposits |
|||||||
|
Radium (combined
226/228) (pCi/L) |
00 |
5 |
0.41 |
NA |
NA |
2024 |
No |
Erosion of natural deposits |
|||||||
|
Uranium (ug/L) |
00 |
30 |
13 |
3 |
13 |
2024 |
No |
Erosion of natural deposits |
|||||||
|
Contaminants |
MCLG |
AL |
Your Water |
Range |
# Samples
Exceeding
AL |
Sample Date |
Exceeds AL |
Typical Source |
|||||||
|
Low |
High |
||||||||||||||
|
Inorganic Contaminants
|
|||||||||||||||
|
Copper -
action level at consumer taps
(ppm) |
1.3 |
1.3 |
0.031 |
0.0017 |
0.036 |
0 |
2025 |
No |
Corrosion of household plumbing systems; Erosion of natural deposits
|
||||||
|
Unit Desc |
riptions |
|
Term
|
Definition
|
|
ug/L |
ug/L : Number of micrograms of substance in one liter of water
|
|
ppm |
ppm: parts per million, or milligrams per liter (mg/L) |
|
ppb |
ppb: parts per billion, or micrograms per liter (µg/L) |
|
pCi/L |
pCi/L: picocuries per liter (a measure of radioactivity) |
|
NA |
NA: not applicable |
|
Important Drinking Water Definitions |
|
|
Term |
Definition |
|
MCLG |
MCLG: Maximum Contaminant Level Goal: The level of a contaminant in
drinking water below which there is no known or expected risk to
health. MCLGs allow for a margin of safety. |
|
Important Drinking Water Definitions |
|
|
MCL |
MCL: Maximum Contaminant Level: The highest level of a contaminant
that is allowed in drinking water. MCLs are set as close to the
MCLGs as feasible using the best available treatment technology.
|
|
TT |
TT: Treatment Technique: A required process intended to reduce the
level of a contaminant in drinking water. |
|
AL |
AL: Action Level: The concentration of a contaminant which, if
exceeded, triggers treatment or other requirements which a water
system must follow. |
|
MRDLG |
MRDLG: Maximum residual disinfection level goal. The level of a
drinking water disinfectant below which there is no known or
expected risk to health. MRDLGs do not reflect the benefits of the
use of disinfectants to control microbial contaminants. |
|
MRDL |
MRDL: Maximum residual disinfectant level. The highest level of a
disinfectant allowed in drinking water. There is convincing evidence
that addition of a disinfectant is necessary for control of
microbial contaminants. |
|
MPL |
MPL: State Assigned Maximum Permissible Level |
|
90th
Percentile |
Compliance with the lead and copper action levels is based on the
90th percentile lead and copper levels. This means that the
concentration of lead and copper must be less than or equal to the
action level in at least 90% of the samples collected. |
For more information please contact:
Contact Name: Sam Rodar
Address:
PO Box 667
SANTA CRUZ, NM 87567
Phone:
505-670-0257